Advanced Molding Technologies manufactures electrical connectors for automotive industry clients worldwide. Our custom-built products are equipped with a variety of features, including an allowable leak rate of 10 cc per minute at 8.5 PSI, an O-ring groove with a .003 inch maximum allowable parting line mismatch, 20 pound capacity load on terminals, and a part identification number molded within each sensor. All of these electrical sensors were constructed using Rynite 530 (PET). Meeting a (±) 1° angular tolerance, a .5° draft per side, and a true position of .01 inches on all diameters, our sensors were built to match client specifications supplied to us through two-dimensional CAD drawings. Each sensor measures .768 inches in width and 1.16 inches in overall length.